Extension board documentation
The extension board is a plug-on module for the gluonpilot main board. It gives you these additional features:
- Use your main battery, or a separate battery for power supply: Just plug in your battery and the extension board takes care of a clean power supply to the main board!
- An XBee socket allows you to take full advantage of the gluon control station! Powered by a separate voltage regulator.
- Optional an OSD chip that shows some pretty overlays on your video signal. You can use the extension board to power your TX and Camera.
- An extra FTDI connector for configuration or firmware upgrade.
Basically the extension board makes your life easy!