Hi all,
As the new smaller GP soon is here, I decided to continue my attempt to make a really small UAV or MAV.
Earlier this summer I managed a 49 cm wing to fly well with camcorder onboard but now it's time to go really small
I read Tom's thesis about constructing a MAV and it was a good source of information.
As a starting point I just quickly made up a wing out of the outer pieces of an Eppfly wing. I will look for other solutions also, so this is just a first test.
While waiting for the GP2 I will also start looking for really light equipment like motor, ESC, servos etc.
Here's a picture of the first candidate - 16 grams without equipment... Target should be around 60-70 grams...
/Björn