I am trying to build the rtos pilot with gluon srce ver 0.5. When I run the build it always fails with the message shown below. I have included MPLAB C30 lib in the library path and even move the spi.h file into the same directory as the gluon pilot header files but without success. Would appreciate any help. Thanks in advance.
I assume I can download the output into the gluonpilot module directly using the DS30 bootloader ?
"tmp\dataflash.o(.text+0xc4): In function `dataflash_open':
E:\Gluonpilot downloads\Gluonpilot_src_v0.5\Firmware\rtos_pilot\..\lib\dataflash\dataflash.c:61: undefined reference to `OpenSPI2'
tmp\scp1000.o(.text+0x52): In function `scp1000_init':
E:\Gluonpilot downloads\Gluonpilot_src_v0.5\Firmware\rtos_pilot\..\lib\scp1000\scp1000.c:37: undefined reference to `OpenSPI2'
Link step failed."