XBee series 2.5 configuration
Posted: Sun Oct 31, 2010 3:31 pm
Hi,
I just switched from XBee "regular" aka series 1.0 to series 2.5. It no longer works "out of the box". A series 2.5 network needs 1 "coordinator.
So if you want to have a transparant serial XBee-link, one of your XBee modules will need to be set as the "coordinator".
For more info check http://t413.com/news/fast-2-way-xbee-series-2-data
I just switched from XBee "regular" aka series 1.0 to series 2.5. It no longer works "out of the box". A series 2.5 network needs 1 "coordinator.
So if you want to have a transparant serial XBee-link, one of your XBee modules will need to be set as the "coordinator".
For more info check http://t413.com/news/fast-2-way-xbee-series-2-data